My idea was an x shaped mount with 3 spindles and a circuit distribution board mount. 90 left and right, ruff in, detail then finishing bit. I have alot to learn still but love to build
My idea was an x shaped mount with 3 spindles and a circuit distribution board mount. 90 left and right, ruff in, detail then finishing bit. I have alot to learn still but love to build
http://youtu.be/9dTS1A2F4j8
Anyone have any ideas as to how I can monitor my spindles speed?
I was thinking a simple Hall effect sensor would do but have never tried
http://youtu.be/9dTS1A2F4j8
I am setting up to use an optical interrupt sensor. Mach3 if that's what Ur using can accept input from one as an index pulse. I believe it will display it as rpm but not sure. I'll link the thread I found regarding it.
Kevin.
Nsr customs.
Here it is. If the PDF link is dead I have it. http://www.machsupport.com/forum/ind...?topic=15455.0
Kevin.
Nsr customs.
I am also currently using a optical hand based point and shoot tester for rpm, but am in the process of researching a circuit setup and sensor perma mounted.
Nice! I will post what I find and end up using. I tend to get crafty lol next thing ya know I have a hole new controller with added spindle monitor. Out comes the pcb etching equipment hahaha
http://youtu.be/9dTS1A2F4j8
Still waiting on my BOB so I have started working on little improvements to my laser cnc.
I built a new motherboard for the arduino nano and easydrivers also incorporating a atmega328 for future laser monitoring "laser power and serial lcd monitor". The laser driver and on/off control circuit is also built in for a compact design.
https://plus.google.com/app/plus/x/1...19814544826914
https://plus.google.com/app/plus/x/v...12868704625330
Next I am going to replace all of the MDF with fresh clean board and paint it.
Along with a cleaning of all extrusion cuts and surfaces as the cnc was built with hand tools and not that great looking.
My shop at work has a small bandsaw I can use in order to alow me to make clean cuts, hacksaw kills the arms after a few cuts into extrusion and never end up with a true square cut
Pic of me playing with the cnc testing its ability
https://plus.google.com/app/plus/x/j...63307802068050
http://youtu.be/9dTS1A2F4j8
Still waiting lol -.-
http://youtu.be/9dTS1A2F4j8
Yes indeed I have some OCD lol
I just like the feeling I get from looking at a completed job
My main thing is clean lay out, it makes for easy trouble shooting and better air flow/cooling.
If I open something up and it's a rats nest I go crazy lol
I'm about to pop in the little disc that came with it to see it I luck out with a copy of Mach3 like my buddy did
http://youtu.be/9dTS1A2F4j8
That is the plan but first I want to see how we'll this made up RC spindle works.
Then if I'm happy the quest will begin lol
What I have in my head is 3 L brackets to mount the spindles, flat base for mounting control board and center mounting to a stepper for rotating each spindle into position an a locking pin controlled by a solenoid.
http://youtu.be/9dTS1A2F4j8
Any luck with the 6560 drives? I fixed my missed steps by swapping x for the 4th. So I know the x circuit has issues somewhere.
Kevin.
Nsr customs.
Just got the BOB lastnight after work and today is fix up the washroom day lol so maybe later tonight or tomorrow I will test it out. I just hope this BOB is not a crap chin product that's just going to disappoint like the TB6560 boards
http://youtu.be/9dTS1A2F4j8
Yea. Hopefully they designed them half way decent. Looking at all the eBay offerings I'm gonna order one that has a 0-10v output integrated for spindle control.
Kevin.
Nsr customs.
That could be trouble lol
http://youtu.be/9dTS1A2F4j8
Well I'm happy to say I got a copy of Mach3 v2.64 with licence and a few other cam and art programs
Lol Mach3 for $11.50 that makes the damage on the BOB seem like nothing
Next I gotta hook up this thing and test it
HAPPY DANCE :banana:
http://youtu.be/9dTS1A2F4j8
Nice!. I may get that one just for the disk.. Lolz
Kevin.
Nsr customs.