[Beliathan]

Somebody, please help. We have Yang ML60-A CNC lathe with Fanuc 0-T controller from which we accidentally cleared most of the parameter data. We got almost everything sorted out except...

We are completely missing tool wear / tool length compensation option/function. Pressing offset only brings up 'tool geometry' and 'work shift', but 'wear adjustment' is nowhere to be found! Is this a problem with parameters or something else?

[underthetire]

Option parameter
Tool Offset type "B"

[MetalZilla]

Not sure of the parameter but if you need some tool comp help try here: Tool Nose Radius Compensation Lathe Cam

[Beliathan]

Option parameter
Tool Offset type "B"

Thanks for the reply! I assume optional parameters are the ones from 0900 to 0920? We have the parameter table but it's lacking explanations. Could you be more specific what parameter/bits you are referring to? Everything else is working well, but this one function is causing trouble...

[underthetire]

Yes it's in the 900's.
No I wont disclose option parameter number, especially not on an open forum, nor do I have the list with me.

[Beliathan]

Yes it's in the 900's.
No I wont disclose option parameter number, especially not on an open forum, nor do I have the list with me.

I had no idea the parameters are secret. Just trying to help my dad out; none of the Finnish repairmen seem to know anything about the whole issue.

If you get the list and want to help, PM me. Thanks anyway!

[underthetire]

If i don't get bombarded tonight when I walk in the door, I can dig it up.

[Beliathan]

Problem solved! We found the right parameters by doing some side by side comparison with friends Fanuc 0-T. Cheers!