Auto tool setter / touch plate ?
I want to make a touch plate but have a question.
I would be connecting the plate to a input pin on my gecko g540 controller and the tool would be ground .
Do i need to insulate the touch plate from the machine? If i were using a aluminum touch plate i would think that it would short if laying anywhere metal on the machine since its grounded . Am i correct to think this?
Also i was looking at a video and they had a touchplate/toolsetting screen in there mach3 .Where can i get that and is it just a addon tab on mach3 or do i have to get a whole new screen set?
Grizzly G0602-AXA QCTP<<< Soon to be CNC and 3PHA-VFD !
7x14Lathe, X2cncmillG540 Solidworks,HSMworks,VcarvePro