Dear all.
My CNC center have alarm: 3156: FSSB: Number of amps is small. I have tryed to change almost every thing , but it's still. Please let me know whe and how to fix this problem, thanks you.
Some parameter is: ( as FSSB setup documents)
1020 x=88, Y=89, Z=90
1023 X=1, Y=2, z=3
1902.0=0.
1902.1=0.
1904.0=0.
1905.0 X=0, Y=1, Z=0( the machine have 03 axis).
1905.6,7 X-0, Y-0, Z-0.
1910 to 1919= 0.
1936= 0.
1937- 0.
Thread: 5136 FSSB problem with Fanuc 21i
Results 1 to 4 of 4
-
01-28-2013, 02:06 PM #1
Member
- Join Date
- May 2008
- Posts
- 107
5136 FSSB problem with Fanuc 21i
-
12-05-2015, 07:04 AM #2
Registered
- Join Date
- Jul 2014
- Posts
- 11
Re: 5136 FSSB problem with Fanuc 21i
Hi,
did you find any solution for this problem? Am stuck with the same alarm 5136 and 750 . Please help me to fix it
-
12-06-2015, 01:42 AM #3
Member
- Join Date
- May 2008
- Posts
- 107
Re: 5136 FSSB problem with Fanuc 21i
Hi shanu4454.
Originally Posted by shanu4454
I fixed this solution after I changed the axis card( A20B-3300-0392).
Nam.
-
12-06-2015, 01:43 AM #4
Member
- Join Date
- Apr 2011
- Posts
- 841
Re: 5136 FSSB problem with Fanuc 21i
Go to the Fanuc System FSSB page and see which axis are missing. Check the drives for U on the display.
Reply With QuoteSimilar Threads
-
Fanuc 21i-M fssb fault
By Dean-R in forum FanucReplies: 0Last Post: 01-18-2014, 01:50 PM -
A06B-6117-H105, Fanuc Servo Amplifier Alpha iSV 1-80 FSSB 30i
By nice-day in forum FanucReplies: 0Last Post: 12-08-2013, 09:32 PM -
5136 FSSB alarm on fanuc Oi mate
By leor in forum FanucReplies: 12Last Post: 09-02-2010, 03:45 PM -
Fanuc 18i controller 926 FSSB alarm
By FanucIssues in forum FanucReplies: 1Last Post: 05-05-2009, 01:24 AM -
FANUC 926 FSSB ALARM
By sting_dot in forum FanucReplies: 1Last Post: 12-05-2007, 06:47 PM
Tags for this Thread
Posting Permissions
