Hello all,
I have a Mazak Tech here right now and we are trying to suss out the source of my 221 alarms (Turret clamp sensor malfunction).
The nature of the product line requires a somewhat unbalanced turret and my theory is that the programmed delay time between the 'clamp' command and the 'in position' signal from the prox may be too short.
Does anyone have a parameter list regarding turret operation? Fusion 640T, QT250HP. I'd just like to have it to bring to the conversation since we have a tech available as we speak.
Results 1 to 2 of 2
-
02-06-2013, 03:09 PM #1
Registered
- Join Date
- Feb 2007
- Posts
- 102
Mazak Tech In house - Turret Alarms - Parameter for delay
-
02-20-2013, 09:12 AM #2
Registered
- Join Date
- Oct 2009
- Posts
- 15
AL221 Turret Clamp Sensor Malf probably can happen because Home Position for it is gone.
and maybe battery's MRJ2 for turret is also drain.
hopefully this can solved ur problem.
Reply With QuoteSimilar Threads
-
Mazak ST40N ATC Alarms
By Mert-G in forum Mazak, Mitsubishi, MazatrolReplies: 3Last Post: 10-28-2019, 11:29 AM -
SOLVED...Mazak QT20 several alarms
By SINUMERIKO in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 01-08-2010, 07:10 PM -
Service Tech and In House Eng. WANTED!!!!!
By coalstove in forum Employment OpportunityReplies: 0Last Post: 06-10-2008, 02:12 PM -
Mazak alarms strike again
By trademarkmachin in forum DNC Problems and SolutionsReplies: 5Last Post: 09-02-2007, 09:05 AM -
Mazak T1 Alarms
By mbpp in forum Mazak, Mitsubishi, MazatrolReplies: 3Last Post: 06-21-2007, 05:27 AM
Posting Permissions
