Good day.
I have the next problem.
I have a FAGOR 8055M controller and I use Bobcad-Cad V25 pro + 4th rotary axis std.
I'm trying to machine a turbine blade but my post-processor generate code using G93 and G94 (inverse time feedrate). In simulation no problem but when I trying to run the program on CNC, an error occurs in G93 because is trying to use a polar coordinate.
someone could provide me with your post-processor or explain how I can setup the CNC parametersto accepts the "inverse time feedrate"?
THX for your help.
Thread: FAGOR 8055M post-processor
Results 1 to 2 of 2
-
02-06-2013, 06:43 PM #1
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 0
FAGOR 8055M post-processor
-
02-06-2013, 08:21 PM #2
Member
- Join Date
- Mar 2012
- Posts
- 1570
Inverse time is not polar coordinates. You first should find out if your controller supports inverse time.
Al DePoalo
Partner Product Manager BobCAD CAM, Inc. 866-408-3226 X147
Reply With QuoteSimilar Threads
-
FAGOR 8055M MASTERCAM V8 POST
By NIKEIME in forum Post Processors for MCReplies: 3Last Post: 09-18-2023, 03:55 PM -
Mastercam post for Fagor 8055M
By jaangi in forum Post Processors for MCReplies: 20Last Post: 01-09-2022, 02:48 PM -
Drive Error with Fagor 8055M
By Kiwi in forum Fagor AutomationReplies: 24Last Post: 08-06-2012, 09:53 AM -
Fagor 8055m and renishaw sp2-1
By mwyss in forum Fagor AutomationReplies: 0Last Post: 05-13-2011, 10:44 PM -
FAGOR 8055M 3Axis Controller
By Kiwi in forum Fagor AutomationReplies: 8Last Post: 11-16-2004, 10:53 AM
Tags for this Thread
Posting Permissions
