584,798 active members*
4,246 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2012
    Posts
    0

    Mach3 output signal

    I am trying to drive one stepper and I connected the circuit and tested it using the Breakout board software, the motor spins perfectly but with Mach3 the axis pul LED in the BB just have a dim light and the motor don't spin >>>>I think it is the output signal from mach so How can I change it?

    Help PLEASE

  2. #2
    Join Date
    Apr 2012
    Posts
    0
    This fourms help me alooooooooooooot

  3. #3
    Join Date
    Jan 2010
    Posts
    12

    mach 3 output signal

    what stepper driver are you using?

Similar Threads

  1. How to send the same output signal for two axis
    By panto in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 04-29-2011, 10:47 AM
  2. 1.6V-3.0V random signal voltage parallel signal from output – Any advice?
    By cjchands in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 11-12-2009, 11:36 AM
  3. Input/output signal on 0M-C
    By padobranac in forum Fanuc
    Replies: 3
    Last Post: 10-28-2008, 03:49 PM
  4. No Output Signal
    By tz1238 in forum Machines running Mach Software
    Replies: 1
    Last Post: 01-27-2008, 09:57 PM
  5. Diag: Output Signal: Enable 1 help...
    By Flatline's Up! in forum Syil Products
    Replies: 11
    Last Post: 04-06-2007, 08:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •