yep
yep
[QUOTE=Goran P.]Hi everyone,
im looking for a mastercam post processor for a heidenhain tnc410 control in iso format. no luck finding or creating one. any help would be extremely appreciated. thank you.
I have a conversational heidenhain post. If that will help
I can write it for you. But it will be not free.
[email protected]
sturdell if you have a heidenhain post for mastercam x please send it to me
husseinte where should i send it.
sturdell
please send it to my email [email protected]
sturdell
please send it to my email [email protected]
I also need this postprocessor
please send it to my email [email protected]
Thanks
I also need this postprocessor
please send it to my email
[email protected]
Hi everyone,
im looking for a mastercam post processor for a HAIDENHAIN TNC415 control in iso format. no luck finding or creating one. any help would be extremely appreciated. thank you.
[email protected]
thank you.
I also need this postprocessor
please send it to my email [email protected]
Thanks
looking for post for this 3-axis lathe (x,z,c, with live tooling) and tailstock
to work with featurecam 2007 and mastercam ver.9.1
I'm new to this site.So hello everybody.
Thanks PEP.
I'm in canada.
hey guys, anyone have a conversational post for tnc 151 for mastercam or ez cam? if so could i get it? email to [email protected] thanks, mark
HELLO
I also need this postprocessor
please send it to my email [email protected]
I know that there have been alot of people asking for this post!Can you please and me to the list.
Thanks,Kelly
E-mail-huebertmachine@yahoo
I'm Neil by the way,,
I'll do a little intro, since this is my first post (but you'll probably see quite a lot of me around here from now on).
I served my time as a mechanical engineer with Michelin Tyre PLC, that was a few years ago, and I have done a lot of manual machining. My boss at work was impressed with the quality of my work, and, having expressed my interest to get into the CNC section, when a position came up, he offered it to me first.
My work has 2 CNC's, a Haas SL20 lathe, and a Bridgeport VMC800 Heidenhain TNC Mill.
I started about 3 months ago, on the Mill, and am now able to program anything that my boss throws at me, with the very occasional little helper from the guy who's been there for years. Great advantage of the much older heidenhain is that you can be writing a program in while the machine is producing a different part, kinda like sky+, but cooler, lol. Gonna start learning the lathe soon too though - did a little G-coding at college a few years back so I should pick it up ok.
I do love the heidenhain conversational though, it's so easy to learn, but I want to learn the PC software side of things too: my work doesn't use mastercam or anything, but if I'm to progress up the job ladder, it's something I feel I need to learn. (and also want to because I've always found CNC's to be the coolest things ever).
Would someone please send me the Heidenhain 410 conversational post processor file (3 axis), so I can have a bash at learning mastercam? I would be eternally grateful, and you'd be welcome round at my place for a drink (Stella Artois, or Stolichnaya are the choices) any time you like
Anyways, like I said, I'll be hanging around here quite a lot, this is by far the biggest and best CNC forum I've ever seen, so many knowledgeable folk all hanging around in one place can't be a bad thing, eh?
[email protected]
Cheers!
have anyone a working post postprocessor for a bridgeport wmc 800 to mastercam 8.1. i have looked everywhere and i cant not find one.
thanks thanks
I also need this postprocessor
please send it to my email [email protected]
Thanks
I also need this postprocessor
please send it to my email [email protected]
Regards
Shajee