584,846 active members*
4,076 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Uncategorised CAM Discussion > Converting turbo cad into a dfx file
Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2013
    Posts
    0

    Converting turbo cad into a dfx file

    I have turbo cad 19 how do I turn my drawings into dfx files so I can run them on sheet cam?

  2. #2
    Join Date
    May 2004
    Posts
    4519
    If it is possible, your program should have a Save As command. See if you can select File Type > DXF. If this function is not available, look to see if your software has an Export function. Read the Help topics for your software. If you are still confused at this point, computers are not in your talent pool. Turn it off and go watch reality television for a few years.

  3. #3
    Join Date
    Oct 2007
    Posts
    9
    Moroni, if you need any more help with TurboCad go to TurboCAD Forums - Index. It's a very good forum with out any dip's on it.

  4. #4
    Join Date
    Feb 2013
    Posts
    0

    Thank you

    Thank you that helped greatly. Appreciate your help.

Similar Threads

  1. Replies: 8
    Last Post: 05-04-2015, 12:49 PM
  2. Converting a pdf file to UG part file
    By gaoxingdcf in forum UG NX
    Replies: 1
    Last Post: 05-20-2010, 01:47 AM
  3. converting a mastercam 9 file into a Solidworks file
    By Michael82 in forum Solidworks
    Replies: 5
    Last Post: 04-17-2009, 07:14 PM
  4. Help converting .fgc file
    By slammedxonair in forum DynaTorch
    Replies: 1
    Last Post: 02-12-2009, 10:19 PM
  5. Converting a .max file
    By DAB_Design in forum Uncategorised CAM Discussion
    Replies: 5
    Last Post: 01-28-2005, 08:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •