584,841 active members*
4,484 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Dolphin CAD/CAM > Okuma OSP 5000-MG Post Processor
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2011
    Posts
    19

    Okuma OSP 5000-MG Post Processor

    Does anyone have a post processor for this control?

  2. #2
    Join Date
    Feb 2007
    Posts
    412
    There is an Okuma post as part of the standard installation T_OKUMA.ppr

    It's quite old and doesn't have many canned cycles, it doesn't use decimal points so that may be a problem, you can modify the post to add them.

    I don't know if will be compatible with your controller.

    There is a thread here that may help

    A few Okuma OSP5000 questions

    ATB
    Andre

Similar Threads

  1. 4-Axis okuma post processor
    By ramirezdono in forum PowerMILL
    Replies: 4
    Last Post: 03-07-2015, 05:52 AM
  2. 4th axis post processor for okuma
    By jonatclifty in forum Mastercam
    Replies: 3
    Last Post: 06-27-2012, 05:57 PM
  3. OKUMA OSP 5000
    By copper in forum Okuma
    Replies: 4
    Last Post: 07-26-2010, 05:03 PM
  4. edgecam post processor for okuma cnc mill
    By Wheels20 in forum Okuma
    Replies: 1
    Last Post: 08-03-2009, 04:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •