584,817 active members*
4,940 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2012
    Posts
    0

    Romi ezpath s post

    Does any one know how to make my ezpath s lathe except a .TXT file off a floppy disk, posted by BobCad. Every time I try the machine says illigal G-code. Thanks

  2. #2
    Join Date
    Nov 2004
    Posts
    3028
    TXT files are loaded as other files.
    Only post that may work would be found in EZCAM and FEATURECAM as Bridgeport was married to them.
    Usually a EZPATH is so simple and fast to program that a CAM system is unncessary.

    George
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. Bridgeport ezpath s V25 post
    By fernwood in forum BobCad-Cam
    Replies: 0
    Last Post: 02-28-2013, 06:48 PM
  2. Bridgeport/Romi EZPATH Schematics
    By NC Cams in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 06-25-2011, 12:00 AM
  3. brigde port romi lathe post
    By normal in forum Surfcam
    Replies: 4
    Last Post: 03-10-2011, 05:50 PM
  4. Replies: 3
    Last Post: 09-25-2009, 08:16 PM
  5. Romi Bridgeport EZPATH-S DX 32 thread cycle problem
    By pdr41 in forum Bridgeport / Hardinge Mills
    Replies: 6
    Last Post: 04-20-2009, 10:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •