[anchovy]

Hi everyone!

I recently purchased a 1997 BMC 30. This machine had been neglected for years.

I pulled the covers off the bottom of the coolant pump and washdown pumps to inspect them. I found the coolant pump to be okay. But the washdown pumps impellars are badly deteriorated.

They are Yeong Chyuan pumps. The impellars measure 3.385 od. .392 id. and are .500 thick.

I'd need to replace them but don't have any idea where to find new ones.

Anyone happen to have a source for these?

Thanks, Jamie

[underthetire]

are these the multiple stage sheetmetal type? If so, check

Lost session

Might find something to fit.


If they are the single impeller type, throw it away and just buy a new one.

[anchovy]

Thanks for the reply.

They are the single impeller cast aluminum type. I can't afford to just throw my pumps away and buy new ones.

There must be replacement impellers available somewhere......

[anchovy]

So nobody has ever had to replace pump impellers huh?????

[pgf545]

I think they press onto the shaft of the pump, at least that is the way they look on our BMC30. You might be able to build something out of steel or stainless if you cant find anything.

Bernie

[Winks]

Anchovy? Delhi? The city or the Santa Ana neighborhood? Are you from Orange County? I am an old bait hauler.