510,023 active members
3,598 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1
    S.N.A.F.U.
    Join Date
    Jan 2005
    Posts
    1880

    older Brush Servo amps

    Does anyone know how the HAAS MOCON comunicates with the drives?

    Ie. PWM, step dir, +-10v ect...
    thanks
    Michael T.
    "If you don't stand for something, chances are, you'll fall for anything!"

  2. #2
    S.N.A.F.U.
    Join Date
    Jan 2005
    Posts
    1880
    Anyone?
    thanks
    Michael T.
    "If you don't stand for something, chances are, you'll fall for anything!"

  3. #3
    Registered
    Join Date
    Mar 2005
    Posts
    1498
    060218-2156 EST USA

    miljnor:

    Limited info in the manual.

    P3 on servo board. PWM and H drive control signals from Motor Interface and overcurrent sense block. 16 KiloHz, Ilimit 20-22 A, nominal supply 160 V. Continuous power output limited. This determination is in "Motor Interface". Send your fax number if you want a copy of the several pages. Not much information.

    .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •