Hello,

Wondered if anyone could help or know which pins connect to which pins in an interface cable hypertherm part number 123896 ???

I bought a THC card from a uk supplier that can connect to a wide range of hypertherm plasma machines but needs that lead as part no. above, only problem i have is my existing interface lead that i bought a long time before buying the THC has a 14 way cpc plug one end and spade terminals the other end. This is a problem as the THC card needs to connect using a 15 pin D-sub. and not spade terminals.
rather than buy another lead i thought i could just solder on a D-sub connector to get it going. has anyone done this before?

I'm guessing the pins would be like for like i.e 3&4 (torch on) in the cpc plug to 3&4 in the D-sub, 5&6 (div volts) in the cpc plug to 5&6 in the D-sub etc.etc.
but didn't want to just take a guess and find out the hard way!!
Would be very grateful for any help.

Many Thanks