[Bosto]

After changing the battery I had to clear a checksum Alarm. I now have to Alarm messages:- 5055 ATC Arm Swing to Magazine side Time Over and 5102 No Option. I am unable to power up the machine to get the NC display from where I could possibly clear the Alarm in Maintenance mode.
Anyone have any ideas how I can clear these alarms. Ladder looks ok.

[shas595]

Hello,

what control does the VM have, and is it a VM40 or possible a VM40II? I might be able to help you, just need some more info.

John

[Bosto]

John,
It is a VM40 with a Seicos II Control. However it looks like I have found the problem. It appears the ladder was partially corrupted. I'll let you know how I get on. Thanks again.

Bosto

[shas595]

Ok let me know how it turns out. I can send you the ladder if you need a copy to restore it.

John

Sent from my DROID RAZR using Tapatalk 2

[boristrpkovski]

Ok let me know how it turns out. I can send you the ladder if you need a copy to restore it.

John

Sent from my DROID RAZR using Tapatalk 2

Hello
I now is old post but if you can send me the ladder for vm40 m2 please send me i really need it
Thanks

[shas595]

I sent you a PM
John

[khiemcnc]

hello ,I now is old post but,please if you can send me the ladder for vm40 m2 please send me i really need it,please!

[blankitatyra]

Ok le snaptube telegram web t me know how it turns out. I can send you the ladder if you need a copy to restore it.

John

Sent from my DROID RAZR using Tapatalk 2

I am unable to power up the machine to get the NC display from where I could possibly clear the Alarm in Maintenance mod

[shas595]

Hello!

What exactly is the issue with your machine - send me a PM with the details and your email and we can go from there
John

I am unable to power up the machine to get the NC display from where I could possibly clear the Alarm in Maintenance mod