[anilam]

I'm still using PM7 with the old opt post and I need to modify it - is anyone here familiar with the old option file?

[ahmad_f]

Could u please explain your objS by detail?

[anilam]

I need the drilling cycles changed to suite a fanuc 18iMB controller.

I need the G05 P10000 code removed from the 2d drilling toolpaths, but not from the 3d toolpaths

I need some info in the toolpath itself like tool type / tool number / toolpath name etc.

[ahmad_f]

As you know, i think there is some ways but they are not so fast as u expect,
1- power mill is not user friendly for all propose,combine master-cam with it i suggest.
2- Read all powermill post processor Docs and create what you want, that is not so difficult.
3- change pomermill Version to higher Version. :nono:
goodlock

[anilam]

As you know, i think there is some ways but they are not so fast as u expect,
1- power mill is not user friendly for all propose,combine master-cam with it i suggest.
2- Read all powermill post processor Docs and create what you want, that is not so difficult.
3- change pomermill Version to higher Version. :nono:
goodlock

yes very useful! go troll somewhere else!