is it possible to build my own machine file then simulate my custom Machine, if yes how to do this ...
is it possible to build my own machine file then simulate my custom Machine, if yes how to do this ...
Can you elaborate a bit more and I maybe able to help you!!
Eoin
for example i have custom machine like this one
i want configure rhinocam based on my custom machine
then put it here
I assume you mean that you have a five axis mill an you want RhinoCAM to generate tool paths and then to post process the GCode??
If this is what you mean then yes RhinoCAM can post process five axis....but.....you'll need to purchase the RhinoCAM 2012 Expert 5axis version it's a bit pricey though......and RhinoCAM WILL generate a custom post processor if you require one.
Eoin
so there is no way to test befor purchase it ? i want to be sure that will work
Well you could download the trial version and this will simulate the tool paths but you won't be able to post process. .....However MecSoft have publicly stated that they WIll generate any custom post processor for a customer if the vast range of post processors that are available will not suit a customer. ....
How are you gettting on with the trial version
Eoin