[DrStein99]

The led display does not seem to move away from "1" when I advance carousel. When in MDI mode, do "M6 T2" does NOTHING. Just did a master reset (accidentally) and wiped parameters - just put them all back in. I understand there is a tool macro that is executed? I copied from another machine - not sure where supposed to go #9001? 9000? 9020?

Can anyone advise please?

[lupo_zg]

I think, usually is 9020 program with tool change sequence.

[nautomation]

9001

[alexeye169]

I am also having the same exact issue, not sure what to do from this point on. Can someone please shed some light on this topic please? My machine is a 1983 Kitamura Mycenter1 with Fanuc 3M-C control VMC

[dardo]

Hola,soy nuevo en el foro. Le comento que tengo una KITAMURA MYCENTER 1 FANUC OM,El cual me esta dando dolores de cabeza últimamente. Cuando enciendo la maquina la luz INDEX del pulsador permanece intermitente y nose como solucionarlo, soy de Mendoza argentina y aquí todavía no encuentro quien lo pueda solucionar. Me urge mucho poder repararla, cualquier comentario con respecto al tema me seria de gran ayuda. Graaacias

[anthoo_odin]

You have pictures of your team's problem, I can support you:


[email protected]

[MAPRE]

I am also having the same exact issue, not sure what to do from this point on. Can someone please shed some light on this topic please? My machine is a 1983 Kitamura Mycenter1 with Fanuc 3M-C control VMC

Did you solve your problem?
Do you recommend that CNC (kitamura mycenter 1 fanuc 3M)?
I'm going to buy an equal but I've never worked a kitamura

[emexcee380]

The Kitamura Mycenter 1 w/Fanuc 3M control does not use a 9001-macro for the ATC. It is completely controlled by relay logic.
* Confirm that the ATC is retracted
* Confirm that the ATC is UP
* Confirm that the spindle tool is CLAMPED
* Confirm that the ATC TOOL POCKET opposite the spindle is the number shown in the LED window.
Note: The pocket opposite the spindle must always be empty.

Command Txx M06; in MDI. What happens?