584,865 active members*
4,913 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2006
    Posts
    5

    fanuc 10t controller

    can anyone help me with a fanuc 10t control, when i zrn the 'c' axis throws up an alarm, the problem only occured after a mate decided to change a parameter to get off set geometry, i do not have a manual to know how to change this back and do not know how to get into the paramaters, i do have a list of parameters which were inside the cabinet.

  2. #2
    Join Date
    Dec 2003
    Posts
    24216
    In e-stop In MDI go to the parameter screen and change the least significant (PWE) bit of 8000 to 1, this allows you to change the parameters,
    Remember to change it back when done, some require power down and back up afterwards.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •