If you press and hold the green control on button the screen reports General Test....passed.
But as soon as you let go of the button it goes off. This machine new to me, I have no
history on it, the Fagor is not controlling the spindle speed or direction, they are still manual
Hardinge. To be honest...and don't laugh...oh, go ahead if you need to....there is more
than a faint odor of what I would call plastic or electronics when I sniff around the back of the
control panel....Good news eh ? Any help appreciated.
Results 1 to 2 of 2
-
04-04-2013, 05:38 AM #1
Registered
- Join Date
- Dec 2009
- Posts
- 8
8025-T on DV59 w/ Accuslide ? Will not stay on during power up
-
04-08-2013, 07:51 PM #2
Registered
- Join Date
- Dec 2011
- Posts
- 73
Well that kind of smell is never a good thing. Could be that something is shorted out. sounds like the control needs to be repaired.
Reply With QuoteSimilar Threads
-
8025 TS power failure
By osbornemc in forum Fagor AutomationReplies: 2Last Post: 03-08-2010, 10:17 PM -
fagor 8025 tg accuslide. z runaway
By brianm1 in forum MetalWork DiscussionReplies: 1Last Post: 07-31-2009, 08:37 AM -
Fagor 8025/ accuslide error 099, M-tables lost
By Tinmuk in forum Controller & Computer SolutionsReplies: 0Last Post: 07-25-2009, 04:45 PM -
I know to stay away from cnc bridges. Who else do I stay away from?
By slashmaster in forum MetalWork DiscussionReplies: 3Last Post: 05-13-2009, 11:43 PM -
Fagor 8025 TG Accuslide Z axis trouble
By Tat2nu in forum MetalWork DiscussionReplies: 1Last Post: 07-06-2007, 02:06 AM
Tags for this Thread
Posting Permissions
