584,812 active members*
5,198 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > fanuc option parameter can not change
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2009
    Posts
    75

    fanuc option parameter can not change

    Dear All,

    We have a yang smv-1000 with fanuc 0-md controller My questions as below

    We tried change 900 option parameter for the 4th axis but all parameter change back to 0 again, why we can not change some option parameter?

    Yang SMV-1000 does not has 4 axis select button, after install 4 axis how can make zero point 4th axis, what kind of button we need or what? Or we will use direclty G28 A0.?

    We have another breand with Fanuc 0-M series taiwan cnc machine, we change 907.3 to 1 and D493.7 we shut down and open again this machine 4 axis is valid, about yang which diagnostic we need the change?

    Thanks&Rgeards

  2. #2
    Join Date
    Sep 2008
    Posts
    138
    Hi Freemanxxx

    The diagnostic is belonging to machine tool builder, and some option can turn on when you add more hardware or change the EPROM software of CNC

Similar Threads

  1. Fanuc 18i optional parameter change
    By jojojoo in forum Fanuc
    Replies: 16
    Last Post: 02-27-2024, 06:52 PM
  2. Fanuc OM Tool Change Height parameter
    By samstain in forum Fanuc
    Replies: 6
    Last Post: 11-24-2011, 04:56 PM
  3. Replies: 1
    Last Post: 04-07-2011, 09:11 AM
  4. Replies: 3
    Last Post: 11-03-2010, 02:11 PM
  5. fanuc 9M option parameter
    By YOO in forum Fanuc
    Replies: 0
    Last Post: 01-05-2007, 12:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •