Hello
I know how can i get one cycle time one part and i want to write the value into e.g program or some file. Is it possible?
Hello
I know how can i get one cycle time one part and i want to write the value into e.g program or some file. Is it possible?
Hi kotlas6667
Can you explain more in detail what are you trying to do i think i might be able to help you
Hi
My machine is connected to net and include hdd where i can conect e.g on F:\ (\\xxx.xxx.xxx.xxx\$f)
Is possible or is it somewhere (in HDD) the registered value of the R parameters?
Yes it is possible.
I am not sure if you can write on network location, but you can do that in your WPD or SPF or MPF directory on the machine.
You can do that with WRITE command.
I am using it to write my probing results into file "PROBE_RESULTS.SPF".
Now you should do the same thing, but you will have to create your own cycle/macro with timer function and WRITE instructions of course.
Then you call that cycle on beginning and end of your program with different parameter for ON/OFF
Example:
T1 D1
M6
TIMER(1) ;1 turns your timer ON
...
...
G75 Z0
TIMER(0) ;0 turns your timer OFF
M30
So i would do it like that if it was me.
That custom cycle writes the values by it self into my result file
But if you never wrote any of your own cycles i think you might be in trouble.
I am not sure if i can explain everything in details here.
Contact me on PM and give me your e-mail we will discus some details and maybe later on this week i write you that cycle.
Cheers
Hi all!
Writing is fine, but when writing the file is always loaded (mark X), and I want to this file after writing unloaded (without X). is it possible?
Try downloading this file.
Siemens Industry Online Support - Automation Service, Automation Support, Simatic Service, Simatic Support, Technical Support, Technical Consulting
All of the functions with writing, reading parametres, math are listed there.