I noticed that the low vibration on my bosch colt router is causing the Z limits to go off. What kind of limit switches are you using on yours?
Results 1 to 3 of 3
-
04-12-2013, 06:30 AM #1
Registered
- Join Date
- May 2007
- Posts
- 26
Low Vibration causing the Z limit to switch
-
04-12-2013, 10:09 PM #2
Registered
- Join Date
- Jun 2011
- Posts
- 25
Cherry snap action micro-switch w/ roller. Some of my larger machines I use hall sensors w/ magnets
-
04-12-2013, 10:16 PM #3
Registered
- Join Date
- Jun 2011
- Posts
- 25
Cherry snap action micro-switch w/ roller. Some of my larger machines I use hall sensors w/ magnets. You could also be seeing the effects of electrical noise from the router and/or steppers coupling into the pull up resistors on your BOB. You can try going into Mach3 and increasing the de-bounce time for your switches.
Reply With QuoteSimilar Threads
-
Help with plunge cuts causing limit trip
By btsioles in forum Mach Software (ArtSoft software)Replies: 0Last Post: 03-29-2013, 09:41 PM -
pulley causing vibration on feed screw?
By KPNO in forum Linear and Rotary MotionReplies: 1Last Post: 05-25-2011, 05:50 PM -
What's Causing my Power supply to Current Limit?
By blue_steel in forum Stepper Motors / DrivesReplies: 2Last Post: 11-29-2008, 10:34 PM -
limit switch and home switch setup
By Runner4404spd in forum CNC Machine Related ElectronicsReplies: 0Last Post: 12-15-2005, 02:58 PM
Posting Permissions
