Hi,
I`m looking for a post processor for Haas umc 750. Or maybe can help, with B axis and C axis post processors.
Thank you
Hi,
I`m looking for a post processor for Haas umc 750. Or maybe can help, with B axis and C axis post processors.
Thank you
Do you already have a 5-axis post processor?
No i haven`t
duplicate message
The UMC750 is a new machine to Haas and I haven't seen the 5 axis code on that controller, although I've seen it on the VF machines.
Have you got a programming manual you could attach or some proven 5 axis code you could attach?
What version of Edgecam are you running?
Yes Umc is the newest machine of Haas. I bouguht it but it will come at september. Then I havent any code yet.
I have Edgecam 2012 r1 and camworks2011 .I`m not sure that I which program i must use .
(sory about my english)
Once you get some proven 5 axis sim code from Haas then drop me a line and I'll have a look and see if I can help you.
To clarify, when you say 5 axis do you mean positional 5 axis , ie , 3 & 2, or full 5 axis simultaneous?
BTW you could do with upgrading Edgecam if you can. The next version is due out soon and looks pretty good.
Edgecam Workflow Webinar