584,837 active members*
4,975 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > EdgeCam > Edgecam 5 axis post processors for haas umc 750 (with B+C axis)
Results 1 to 7 of 7
  1. #1
    Join Date
    Sep 2007
    Posts
    9

    Edgecam 5 axis post processors for haas umc 750 (with B+C axis)

    Hi,
    I`m looking for a post processor for Haas umc 750. Or maybe can help, with B axis and C axis post processors.
    Thank you

  2. #2
    Join Date
    Mar 2013
    Posts
    12
    Do you already have a 5-axis post processor?

  3. #3
    Join Date
    Sep 2007
    Posts
    9
    No i haven`t

  4. #4
    Join Date
    Jun 2008
    Posts
    125
    duplicate message

  5. #5
    Join Date
    Jun 2008
    Posts
    125
    The UMC750 is a new machine to Haas and I haven't seen the 5 axis code on that controller, although I've seen it on the VF machines.

    Have you got a programming manual you could attach or some proven 5 axis code you could attach?

    What version of Edgecam are you running?

  6. #6
    Join Date
    Sep 2007
    Posts
    9
    Yes Umc is the newest machine of Haas. I bouguht it but it will come at september. Then I havent any code yet.
    I have Edgecam 2012 r1 and camworks2011 .I`m not sure that I which program i must use .
    (sory about my english)

  7. #7
    Join Date
    Jun 2008
    Posts
    125
    Once you get some proven 5 axis sim code from Haas then drop me a line and I'll have a look and see if I can help you.

    To clarify, when you say 5 axis do you mean positional 5 axis , ie , 3 & 2, or full 5 axis simultaneous?

    BTW you could do with upgrading Edgecam if you can. The next version is due out soon and looks pretty good.

    Edgecam Workflow Webinar

Similar Threads

  1. List of my Edgecam Post Processors
    By rosso in forum EdgeCam
    Replies: 18
    Last Post: 03-27-2022, 09:57 PM
  2. post Edgecam to Mach3 5-axis
    By DL2008 in forum EdgeCam
    Replies: 1
    Last Post: 11-14-2010, 03:52 PM
  3. DEVELOPMENT POST PROCESSORS 3 4 5 AXIS AND MULTI TASKS
    By andrenxcam in forum News Announcements
    Replies: 0
    Last Post: 05-31-2010, 05:25 PM
  4. My two 4 axis Haas post processors (VF2)
    By DiegoM in forum EdgeCam
    Replies: 7
    Last Post: 04-07-2009, 05:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •