Special purpose type thing, 2.75" dia change in 6" of run. Is that an I value of 1.604" starting 1/2" before the part? Can the control even handle that big of an I value?
G71X2.75z-6.I1.604D.05H.375F.15M33M73
Results 1 to 3 of 3
-
01-12-2024, 01:32 AM #1
Member
- Join Date
- Feb 2010
- Posts
- 83
Having trouble with a very steep tapered thread on OSP7000
-
01-12-2024, 06:47 AM #2
Member
- Join Date
- Feb 2010
- Posts
- 83
Re: Having trouble with a very steep tapered thread on OSP7000
Got it figured out.
-
01-13-2024, 11:46 AM #3
Member
- Join Date
- Jun 2015
- Posts
- 4154
Re: Having trouble with a very steep tapered thread on OSP7000
hyCan the control even handle ...
as long as angle < 45*, and linear axis speed is slow in comparison to rapid, then no worries
if you wish for specific advice, please share more / kindly
kfigured outLadyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
Reply With QuoteSimilar Threads
-
Tapered Pipe Thread
By RAF. in forum BobCad-CamReplies: 2Last Post: 12-16-2016, 02:25 PM -
Fagor 8055 tapered thread
By clayman in forum G-Code ProgramingReplies: 0Last Post: 05-30-2015, 07:19 PM -
Threadmilling a tapered thread
By dblox in forum Dolphin CAD/CAMReplies: 4Last Post: 08-08-2012, 04:36 PM -
bq drill rod, threading (tapered, square thread)
By pmurdock in forum MetalWork DiscussionReplies: 8Last Post: 04-30-2008, 06:33 AM -
TL-2 Tapered Thread Problem
By dhelms in forum Haas LathesReplies: 5Last Post: 04-21-2008, 07:27 AM
Tags for this Thread
Posting Permissions
