Hello I have a new to me Takisawa TC-1 I bought all of the operating manuals but they cannot answer a few things I am seeing.
1) First after it has been powered up for 5-15 min it turns the Red light Question mark on and you can hear the Hyd shut down. After 5-10 min they power up by themselves. Also I do not get an alarm with this, all I get is a not ready in the lower left screen area.
2) I entire a work shift value and it will run 3-4 parts until the above issue shuts it down. After that when I home it out it will not find the same work values as it was using before. It moves inches from where it was.
3) It does not do anything trying the soft keys under the monitor. All of my other O-T's have soft keys that give additional screens.

This machine is new to me and I would like any help I can in understanding it. It does not work like any of my other machines.

Thank you, Bruce