[omnicnc]

Recently, we received some kitchen photos the OMNI enduser from Nowary. The customer bought OMNI CNC wood router, and mainly produce kitchen cabient.

This is the first entrance for CNC for him, so he does not want very advaned this time, prefer the basic configuration with easier operation. Then he asked if could load MDF to router table to cut. And this is the basic function for cnc router, then we send him the working video of our OR1325 cnc wood router, which cut MDF 20mm very quickly.

He watched, and asked the question that how cnc wood router can cut so deep without cutting the table surface. Then ,was replied what would put plywood layer between MDF and working table for protection. And vacuum pump could hold these two pieces of wood sheet down tightly. We had one test, put 5 pcs of 20mm MDF sheet together, and using 5.5kw vacuum pump to holding down, and no moving when try to push it.

So questions one by one, and we suggest him the vacuum pump, dust collecting system etc. Stig is very satisfied with the cnc wood router, and offered several photos for showing the cabinet he made.

Well, I tried several times to uploade photos, failed. Anybody who is interested in to see, let us know.

[Tina-omni]

Well, here are the pics, if anybody want further information, pls contact us.
Attachment 185154

[JohnnyRendon]

It will be nice to see some pictures of such a nice vacuum table in action as well as the fast wood router !!!