584,874 active members*
5,403 visitors online*
Register for free
Login
Results 1 to 10 of 10
  1. #1
    Join Date
    Mar 2003
    Posts
    27

    Haas G47 subprogram O9876

    Can someone provide me with the subprogram from a Haas control that does engraving? It is subprogram #O9876.
    Thanks in advance!

  2. #2
    Join Date
    Dec 2008
    Posts
    717
    Quote Originally Posted by dcrace View Post
    Can someone provide me with the subprogram from a Haas control that does engraving? It is subprogram #O9876.
    Thanks in advance!
    It is in your backup file that you saved in a safe place for the time when a rookie deletes a hidden O9000 program:nono:...:stickpoke

    (I'll try to dig it up if I can later...)
    Tim

  3. #3
    Join Date
    May 2011
    Posts
    62
    I went to find this in my control...turned setting 23 off, and it wasn't there. But, I ran a G47 program and in single block I can clearly see that the O09876 program is running. If I could figure out how to get it off the machine, I'd gladly send it over...I'm curious about how to recover these "hidden" programs.

  4. #4
    Join Date
    Dec 2008
    Posts
    717
    I believe it is a macro subroutine...

    You recover them by saving them to a computer so you can re-install them if bad things happen.
    Tim

  5. #5
    Join Date
    Mar 2003
    Posts
    27
    *BUMP* Anyone have any luck finding this?

  6. #6
    Join Date
    Mar 2010
    Posts
    13
    I have it in front of me now. I can either paste it on here or email it to you.
    Chuck
    HAAS vfo,vf3ss,sl20, Akira Seiki H4XP, CMS gang lathes x3, Dimension 1200es 3D Printer

  7. #7
    Join Date
    May 2011
    Posts
    62
    paste it here please

  8. #8
    Join Date
    Jan 2007
    Posts
    243
    Here it is: O01112 (ENGRAVE SEQUENTIAL SERIAL NUMBERS)
    T7 M06
    G43 H07
    G00 G90 G54 X1. Y-1. Z1.
    M08
    S6000 M03
    Z.1
    G47 P0 X1. Y-1. J0.18 R-0.2 Z-0.01 F75. E50. (S/N)
    G47 P1 J0.18 R-0.2 Z-0.01 F75. E50. (#####)
    M09
    G00 G28
    M30
    www.WebMachinist.Net
    The Ultimate Online Source for Machinist Related Stuff!

  9. #9
    Join Date
    Mar 2010
    Posts
    13
    Hey guys,
    Sorry I couldn't get it posted today. Shortly after I replied I got swept away into the shop, never to return to my computer to do what I actually needed to do. I'll send it out tomorrow sometime in the AM. It's a long program, at least longer then the few lines written above. But I'll paste it here unless told otherwise.



    Edit: Ok so I'm looking at this file and it's very long. If you want it I'd be best to shoot me a PM and I'll email it to you.
    Chuck
    HAAS vfo,vf3ss,sl20, Akira Seiki H4XP, CMS gang lathes x3, Dimension 1200es 3D Printer

  10. #10
    Join Date
    Apr 2013
    Posts
    3

    Re: Haas G47 subprogram O9876

    Hello,

    Here is O09876 makro program from NGC machine.

    I hope it will be of some use.

Similar Threads

  1. subprogram
    By krow in forum OKK
    Replies: 0
    Last Post: 09-30-2009, 11:18 PM
  2. Subprogram Problems
    By frogger in forum Haas Mills
    Replies: 8
    Last Post: 04-28-2009, 02:12 AM
  3. Help with subprogram
    By 69owb in forum G-Code Programing
    Replies: 7
    Last Post: 09-05-2008, 11:06 PM
  4. eia subprogram
    By rs1982 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 4
    Last Post: 04-11-2008, 02:10 PM
  5. Eia subprogram in mazatrol
    By magneto259 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 3
    Last Post: 04-10-2007, 04:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •