[Skubi]

Hello.

In the forum i have read about problems with cnc90 and v alberti (busellato).

http://www.cnczone.com/forums/g-code...g_cnc90_-.html

In these link there is a user of forum that seem to have found out how to upload g-code directly to cnc90. I use ugs -. nx7 ahd have a post-processor, but i need help, beacuse cnc90 does not find programs i post-proces.

Can anybody help me finde hidden menu, or soluttion, using nx.

Thank you for help.

Regards Andi

[shags72]

Is the post set up to output the correct file type? I don't know cnc90 but does it require a certain file type and won't see any others?

[Skubi]

The post processor is ok, beacuse the machine reads normal g code, problem is, that v alberti has some strange directory structure. one is srg, other is something else. In srg the code is normal, but the one in other directorys in not the same. I will give an example, when i can.

[shags72]

What I meant was the file suffix. Like .ptp, .eia, etc. The other could be a cls or clsf file?

[Skubi]

the files are without suffix.

dirictorys go like cnc90/mod1/sorg/dgt

cnc90.../srg
cnc90.../tab
cnc90.../ven

and the files are
for example: in srg/00/L
inside is
G71X500Y100Z100T00N4L1
G150(LIPAR DOO)
G81G90G54P5T0101S2500X=l Y0Z0
M2

and the same tab/00/L
inside is

LIPAR DOO 11/08/11 M úC ČB ČB
S
S úC Ä ˙˙

[shags72]

Have you used the software before so you know it will find and use a file without any suffix? That is the only thing I can think of.

[bonll]

Hallo andi

I have a alberti ptp400 and i need a postprocessor.

I can see your have made one in nx7 can your help me to make one in nx 7 for my ptp 400?


Regards Bo