[mfugs]

Hi. I need information on the OSP-E100M control. Does it support DNC and what type? does it have a hard drive? USB or ethernet ports, etc.

A brochure or specs sheet would be great!

Thanks!

mfugs

[underthetire]

Don't think the E100 did. DNC was an option. None of our E100's have USB or ethernet. U100's might.

[mfugs]

Thanks for your input, underthetire. Do you have a PDF you can upload with the specs for any of your E100's?

Thanks!

[underthetire]

Nothing that would help you. Pretty old control now.
And be aware- Okuma is REALLY expensive on control parts, and you have very little choice but to get them from the Okuma dealer. They also do a very poor job at supplying older parts. Ask anyone that had to replace a VAC-A drive from the 90's and got a $15K bill for the retrofit. I can still get a repaired Fanuc drive for a early 80's machine for a couple grand.

[mfugs]

Im a bit confused. The E100 control is the last control before the think control, and it is supposed to be very similar to the think.