We just got a mazak quick turn nexus 250-II my with live tooling. We have been program everything on it with mazatrol we have a part with a slot cut thru it. I can post it out for or mazak mills, but would like to use the same number and put it on the lathe using a eia program. I have not had any luck doing it with mazatrol so mazak told use to try it this way. just can't figure out codes I need to change. Here is a example of my mill progam

O100
N1G91G28Y0.Z0.
N2T9M6
N3G17G40G80G90
N4G54
N5S6000M3M8
N6G90G0G94X.3108Y.1256
N7Z.1
N8G1Z-.285F50.

N26G0Z.1
N27G60G91G28Y0.Z0.M9
N28 M30

ANY HELP PLEASE. THANKS