As an added note, I've done quite a few videos over the years. After awhile, you stop repeating the same things in every video.....
kind of stuff."Go to the utilities command bar located at the top, right side of the main menu"
If there is anything unclear about what happened, you can ask, or point that out, and I'de be happy to continue the conversation. It's a process, not an event.
Thread: Fitting text to a curve
Results 21 to 22 of 22
-
05-11-2013, 08:07 PM #21
Ghost
- Join Date
- Dec 2008
- Posts
- 4548
-
12-18-2017, 10:08 PM #22
Junior Member
- Join Date
- Jan 2006
- Posts
- 43
I have been trying to figure out how to make a model of a cylinder with the text removed to leave a recess. I want to print it using a 3d printer. I am using bobcad V24. When I tried a couple different ways but so far I haven't had much luck. If I project the letters to a curve I can't get them to extrude to a curve so that I can subtract them from the cylinder. I also tried to zip the drawing that I started but it was to big so I didn't include it with this.
GD
Reply With QuoteSimilar Threads
-
3d text on curve
By Lomach in forum Rhino 3DReplies: 1Last Post: 04-09-2012, 08:54 PM -
curve fitting a set of coordinates
By thespindoc in forum Uncategorised CAD DiscussionReplies: 16Last Post: 09-26-2011, 09:24 PM -
Fitting PDB
By wbleeker in forum Tormach Personal CNC MillReplies: 10Last Post: 09-20-2011, 02:16 AM -
Name that fitting...
By zerodegreec in forum Benchtop MachinesReplies: 7Last Post: 08-21-2010, 02:18 AM -
can solid text flow along curve?
By mikeyboy311 in forum Rhino 3DReplies: 6Last Post: 02-20-2009, 11:12 PM
Posting Permissions
