side kick 4
I'm not familiar with that machine. You really should contact them and have them help you figure out what's going on.
They claim "Lifetime Tech Support (phone, email, and pc to pc connectivity)"
http://shopsabre.com/contact.php
If it is moving around as if it is running the file in the air, then you may have z settings wrong in software, these machines do what they are told no more no less.
best guess is you may be using vectric, does the z setting on file match wht the machine thinks ?
James McGrew CAMaster 508 ATC
www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl
I have started a ShopSabre 23 Users Group on Facebook...If you have a 23 Come Join Us https://www.facebook.com/groups/1141969885814946/
New owner here... Castaic California.
Finally got my Sidekick 4x4 router and plasma table in, almost 2 months after promised. I know a jack of all trades is a master of none but I'm hopeful... and at the very least it fits in the small area I have. So far I hooked it up and it's working. Not to hijack but now I'm looking for information on what bits to buy for composite plastics, hardwood, and aluminum. Any PM recommendations for sizes, up down, feed speeds, reasonable sellers, etc would be greatly appreciated. I am kinda disappointed that the table didn't come with recommended values... Or maybe I just haven't found them yet.
Attachment 314376
I've had good experience shopping at Tools today Router bits, Saw blades, CNC Router Bits, Shaper Cutters & More Plenty of info on their site or you can contact them for recommendations.
Thanks, Saw them in google ads and was looking for a first hand confirmation
this Facebook ShopSabre / WinCNC Users Group offers a lot of information from other users. https://www.facebook.com/groups/1141969885814946/
I have found a lot of good info at CNCCookbook: Be a Better CNC'er.
Just got our new IS612 in on Tuesday. Working on getting everything plumbed/wired etc. now. Can't wait to fire it up!! Think it's going to be one hell of an upgrade from our old CamTech!!
Hello CNCers,
I am debating purchasing he IS 510 or the Freedom Machine Tool 510 patriot.
Any Feedback about your experience with Shop Sabre and their product would be greatly appreciated, AND... if you have comments or experience with the Patriot I'd appreciate them too.
I own and run a cabinet shop, and will process 20-60 sheets a week.
thanks
We've had our IS612 for a little over a year now. It's been a great machine so far, and their tech support has been absolutely fantastic to work with. There is also a very good Shop Sabre Owners group on Facebook that's been great for passing around information. Can't find one bad thing to say about Shop Sabre or their service!!
Hope this helps.
What ShopSabre model are you the proud owner of?
I have the ShopSabre 23 and have only had it for about a month now. Up to this point I am VERY impressed with the quality of the machine and the parts I've produced. I produced a set of 1911 pistol grips out of Black Walnut for my son and they turned out awesome. I've been in the CNC router industry for almost 30 years and was an application engineer for the CNC router group at one of the main machinery suppliers for almost 10 of those years, so my expectations are high and so far this machine has met them all.
Anyone here willing to post some electrical requirements
Im looking to get a ProSeries
10 hp/pos ATC spindle
Sabre F4 vacuum w/ hybrid phenolic table & clamping
Thanks