I am going to be parting out the control, spindle motor, and 380VAC transformer from my Emco 220P. This is essentially the same machine as a 120 / 120P / 220 / 220P / Compact6. I will be listing everything on eBay so if you are looking for something in particular, let me know and I will hold off on listing it there. You can reach me through private message on the forum, email through the forum, or posting here.
Results 1 to 2 of 2
-
05-09-2013, 10:58 PM #1
Registered
- Join Date
- Jul 2011
- Posts
- 82
Selling T1 Control, Spindle Motor, and 380VAC Transformer from EmcoTurn 220P
-
06-07-2013, 04:26 AM #2
Registered
- Join Date
- Jul 2011
- Posts
- 82
Transformer will head to eBay shortly if no one here needs one. As will the remaining boards and cards, as well as the spindle motor and drive. This is not connected to my machine any longer.
Reply With QuoteSimilar Threads
-
Selling T1 Control, Spindle Motor, and 380VAC Transformer from EmcoTurn 220P
By Zahnrad Kopf in forum EMCO CNC MachinesReplies: 0Last Post: 05-09-2013, 10:57 PM -
Which motor and drive for g0704 spindle motor control
By JeffsInventions in forum Benchtop MachinesReplies: 17Last Post: 02-14-2013, 01:15 PM -
Parting TM02 Control from Emcoturn 140/240
By Marty_Escarcega in forum EMCO LatheReplies: 2Last Post: 12-31-2012, 01:55 AM -
spindle motor and spindle control dont work
By customcncparts in forum MilltronicsReplies: 0Last Post: 10-01-2009, 08:08 PM -
Need s/w and info on EmcoTurn CNC lathe with a Fanuc OT control
By richarddoucet in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 10-28-2008, 03:55 AM
Posting Permissions
