Hello everyone, as the title states we have Cyflex F900 in our factory and Y axis belt was damaged, operator and our service guy changed the belt but now during calibration Y axis goes to -0.20 and once it starts going up at about +2.0 it loses power, I noticed that in the params for Y axis don't match with live counter on screen, as u can see in the picture it shows park position is -170000 micron I assume that is (-170 on the live counter) and it hits the switch on the Y axis at -0.20. And I asked operator to move the head manually to the max + position which showed +1088,43 on the live counter while params show + limit switch at +923000 anyone has an idea how to solve this?

Thank you!