584,837 active members*
4,895 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > CNC Machining Centers > Where can I find Xilog software?
Page 2 of 3 123
Results 21 to 40 of 42
  1. #21
    Join Date
    Aug 2014
    Posts
    13

    Re: Where can I find Xilog software?

    Thank you Barada...very uselfull info. However..the NC is working fine, I have already loaded the PLC and PAR files previously using a similar schematic. The big issue is that I cannot get the NC to read a .PGM file....I keep getting the error "Invalid File Format"

    More searching over the internet leads me to believe that this old NC requires a file called cnvrt1.1.exe to convert to PGM files and not WinXiso

  2. #22
    Join Date
    Aug 2014
    Posts
    13

    Re: Where can I find Xilog software?

    Thanks for that Service SCM BR....the problem is not the PLC and PAR files...it is to get the NC to open/edit .PGM file created with Xilog.

  3. #23
    Join Date
    Jan 2015
    Posts
    1

    Re: Where can I find Xilog software?

    We are a little carpenter's workshop (3 coworkers) and we have purchased an old machine at auction module. We had expectations improving our productivity, but sincerely, we have no idea how we could optimize times programing our machine out of TRIA7500. We can only program it by typing out the manually in the machine consuming excessive time.

    Is Xilog the appropriate software to be able to program our machine in an easier way?
    Where could find the necessary software?
    How to install Xilog on my PC?
    Do exist a manual or tutorial for Xilog?
    Is it necessary to downgrade the OS to 32bits in order to use Xilog?

    Thank you in advance!

    Machine: Morbidelli 503
    Year: 1997
    Serial Number: AL3514

  4. #24
    Join Date
    Aug 2014
    Posts
    13

    Re: Where can I find Xilog software?

    @AntonioC

    We purchased the A213 (tria7500) a while back on auction and took me 2 months and countless hours on the net to figure this out.

    For our NC, xilog and xilog plus does not work as the NC does not recognise the .PGM file format.

    This is how we resolved it:
    1. We open the .DXF file in Aphacam and save it as .ANC file.
    2. We rename the .ANC file to .TXT file
    3. then we use the CN75NEW.exe file, run in DOS mode to convert the .TXT file to .PGM
    4. We then send the file via NULL-MODEM cable to NC
    5. Open the file in EDITOR on NC and verify it.

    Done..

    Hope this helps...send me an email if you require more info or any of the files etc

    mail at aucklandcabinets dot co dot nz

  5. #25
    Service SCM BR Guest

    Where can I find Xilog software?

    Thankyou auckcabs for your answer.

    For Antonio and others
    The Xilog(3, plus, maestro) only Run in PC(Windows).
    Tria Run in plataform unix developer for Esa-Gv.


    Via iPhone of the Tapatalk

  6. #26
    Service SCM BR Guest

    Re: Where can I find Xilog software?

    https://mega.co.nz/#!lspwzSYS!UPwuV3...u79Nxn8gBch20Q

    Link for download of the Xilog Plus.


    Via iPhone of the Tapatalk

  7. #27
    Join Date
    Jun 2015
    Posts
    2

    Re: Where can I find Xilog software?

    Hola Amigo

    muchisimas gracias por el link de descarga, pero no funciona le doy al setup para instalar y no instala



    muchas gracias amigo

  8. #28
    Service SCM BR Guest

    Re: Where can I find Xilog software?

    What the operation System? 32bits?


    Via iPhone of the Tapatalk

  9. #29
    Service SCM BR Guest

    Re: Where can I find Xilog software?

    Hi, it is solved?


    Enviado do meu iPhone usando Tapatalk

  10. #30
    Join Date
    Jan 2017
    Posts
    24

    Re: Where can I find Xilog software?

    Quote Originally Posted by Service SCM BR View Post
    Hi, it is solved?
    I have the software on my machine, but not the manuals, do you have a copy you can link me to? I am running Xilog3 on a Record 120 built in 2000

  11. #31
    Join Date
    Dec 2017
    Posts
    1

    Re: Where can I find Xilog3 software?

    hi, i have scm recorder 240 an i need a software for this cnc. my plane produce cabinets an mdf doors for them.

  12. #32
    Join Date
    Dec 2017
    Posts
    2

    Re: Where can I find Xilog software?

    i also have morbideli a 213 need tcl file! can u someone help! code is al 1639

  13. #33
    Join Date
    Jun 2020
    Posts
    1

    Re: Where can I find Xilog software?

    I have same problm.

  14. #34
    Join Date
    Oct 2020
    Posts
    1

    Re: Where can I find Xilog software?

    Can i use xilog to program old SCM Unitech KLETRA 400?

  15. #35
    Join Date
    Jan 2017
    Posts
    5

    Re: Where can I find Xilog software?

    hello Service SCM BR.. we have also problems loading plc and par files to the scm tech 99 we dont have the backup disk.. were can we find this information and how we load in to the machine .. thanks

  16. #36
    Join Date
    Apr 2018
    Posts
    4

    Re: Where can I find Xilog software?

    xiloog 3 xilog plus requested !?!!!

  17. #37
    Join Date
    Feb 2021
    Posts
    1

    Re: Where can I find Xilog software?

    Colleagues,
    I have a MORBIDELLI m100 cnc machine.
    We use the old version of the licensed XILOG MAESTRO-EDITOR with a USB key for it from 2010.
    I need the following, if anyone can help me:
    - Does anyone have UPDATE or a newer version of "XILOG MAESTRO-EDITOR" to send me, and can work with my USB key for him?
    - I saw that MAESTRO has some limitations, so I started practicing work on ALPHACAM, so I need an explanation on how to EXPORT to a PGM or PGMX file, is there any post processor for MORBIDELLI m100?

    Any help would be welcome, I saw on the internet similar questions were asked by other MAESTRO program users. So let's help me and the others ...

    Thanks in advance!

  18. #38
    Join Date
    Mar 2022
    Posts
    2

    Re: Where can I find Xilog software?

    Newbie!
    Where I can find SCM Maestro for training.
    Wood Working Industry.

    Thanks a lot guys

  19. #39
    Join Date
    Mar 2003
    Posts
    35538

    Re: Where can I find Xilog software?

    If you have an SCM machine, SCM should be able to send you a link to a demo version they have.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  20. #40
    Join Date
    Oct 2022
    Posts
    11

    Re: Where can I find Xilog software?

    Hi, am from toronto, canada and am currently using xilog maestro programming for cnc. Has anyone used this software and where i can learn more about it and/or have taken courses on this software. Thank you ! my email is [email protected]

Page 2 of 3 123

Similar Threads

  1. RS232 no CNC connection with Xilog software.
    By julioykaly in forum CNC Machining Centers
    Replies: 1
    Last Post: 01-04-2015, 03:52 AM
  2. Configuring a new computer to run CAM software (Xilog), couple of questions
    By StreetSpirit in forum Uncategorised CAM Discussion
    Replies: 2
    Last Post: 08-21-2013, 09:32 PM
  3. Where to find Mastercam x5 or x6 software?
    By kevindflowers23 in forum Mastercam
    Replies: 4
    Last Post: 09-17-2012, 05:45 AM
  4. 2D to 3D software. Where can I find it?
    By jaru-eri in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 04-10-2009, 07:24 PM
  5. The most useful software that I cant find!
    By berin in forum Uncategorised CAM Discussion
    Replies: 3
    Last Post: 12-10-2004, 06:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •