I apologize if this is in the wrong section:
I am trying to set up an older HAAS VF3 to use the renishaw optical probe. When I input G65 P9023... it throws this alarm out.
310 INVALID G CODE - G code not defined and is not a macro call. I went to the parameters for G MACRO CALL and it goes from
G MACRO CALL 9010 91: 200
G MACRO CALL 9011 92: 0
G MACRO CALL 9012 93: 0
G MACRO CALL 9013 94: 0
G MACRO CALL 9014 95: 0
G MACRO CALL 9015 96: 0
G MACRO CALL 9016 97: 0
G MACRO CALL 9017 98: 0
G MACRO CALL 9018 99: 0
G MACRO CALL 9019 100: 0
What can I do to make this thing work. We are running parts that the reference point varies about .010 and using the probe will save on set up time.