[Gency]

I bought an old OKK MCV-5000 CII CNC machine that was not working.
I found that the batteries had died.
I have the manufacturers parameter tape as a backup.

What is the step by step procedure is to Clear the "RAM alarm"
and re-initialize the cpu?

[Websterjunior]

I bought an old OKK MCV-5000 CII CNC machine that was not working.
I found that the batteries had died.
I have the manufacturers parameter tape as a backup.

What is the step by step procedure is to Clear the "RAM alarm"
and re-initialize the cpu?

Hi Gency, Did you find out the procedure to clear the Ram Alarm on the OKK MVC 500, I'm just having the same issue, it wold be great if you have some information.