585,660 active members*
3,276 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc pmc L oel and oe2 ladder chips

Thread: Fanuc pmc L oel and oe2 ladder chips

Results 1 to 2 of 2
  1. 07-23-2019, 05:05 AM #1
    alienturtle
    alienturtle is offline
    Join Date
    Jan 2019
    Posts
    25

    Fanuc pmc L oel and oe2 ladder chips

    I have been working on a makino leblonde rmc55 with fanuc om controls. It has a pmc type L woth the oel and oe2 chips. After lots of research i gathered everything i needed and can now edit ladder in fladder dos program. I made my changed and long story short burnt my 2 new chips. I kept the originals and bought 2 new chips that were the exact same. 27c256. I installed them and fired the machine up. Everything loads great no errors. Buttt when i go into the ladder on the machine. Nothing has changed. Its just like the original chips. Does this think keep it in memory or something? Or did i do something wrong. Thanks guys.
    Reply With Quote Reply With Quote
  2. 07-25-2019, 11:21 PM #2
    drdos
    drdos is offline Member
    Join Date
    Apr 2011
    Posts
    841

    Re: Fanuc pmc L oel and oe2 ladder chips

    Did you by chance make your Edits and then didn't compile it and so when you burn your new set you actually just burned the original compiled ladder?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Looking for 27C64 Ladder chips Fanuc 0-A or B
    By Shoprag in forum Fanuc
    Replies: 31
    Last Post: 03-24-2021, 04:30 AM
  2. Download Ladder Fanuc 15-M by Fanuc Ladder III software
    By truongtronghai in forum Fanuc
    Replies: 7
    Last Post: 04-11-2018, 03:57 AM
  3. Need some rectangular chips cut to replace CF chips that are cracking
    By Lens4Hire in forum Employment Opportunity
    Replies: 1
    Last Post: 03-14-2014, 04:47 PM
  4. Scrap value quesiton, chips vs chunks. Coolant mixed with chips?
    By trialanderror in forum Uncategorised MetalWorking Machines
    Replies: 5
    Last Post: 10-04-2013, 12:08 AM
  5. ladder fanuc om-a
    By rathi_vk in forum DNC Problems and Solutions
    Replies: 1
    Last Post: 01-11-2009, 08:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules