Gigabyte's Brix mini PC to challenge Intel's Next Unit of Computing - The Tech Report
Any low end version should do fine, and if the Intel branded ones are only $135, I would expect the Gigabyte ones to be even less :banana:
Results 1 to 3 of 3
-
05-29-2013, 01:12 PM #1
Gold Member
- Join Date
- Feb 2009
- Posts
- 2143
This looks like it will make for a very small/clean PC for CNC (Mach3 or Linux CNC)!
CAD, CAM, Scanning, Modelling, Machining and more. http://www.mcpii.com/3dservices.html
-
05-29-2013, 03:32 PM #2
Registered
- Join Date
- Mar 2013
- Posts
- 12
Nice. Small form factor will allow for a much cleaner work area.
-
05-29-2013, 07:36 PM #3
Registered
- Join Date
- Jan 2005
- Posts
- 1943
With no parallel port you will have to have a separate motion controller.
Reply With QuoteSimilar Threads
-
Can I make a small suggestion?
By maspeir in forum VideosReplies: 8Last Post: 04-09-2011, 04:04 AM -
Linux/EMC VS Mach3 Where to Start
By Gads in forum LinuxCNC (formerly EMC2)Replies: 4Last Post: 01-29-2008, 03:46 PM -
Anyone try mach3 with linux/wine
By timmyb199 in forum Machines running Mach SoftwareReplies: 3Last Post: 10-23-2006, 07:32 AM -
Looking for some one to make small cap object.
By dbtoutfit in forum Employment OpportunityReplies: 4Last Post: 03-30-2006, 12:45 AM -
Looking for some one to make small cap object.
By dbtoutfit in forum MetalWork DiscussionReplies: 4Last Post: 03-06-2006, 09:48 PM
Posting Permissions
