Anyone have any suggestions for a good utility. I dont like the one that comes with FeatureCam, plus I cant get it work with any machine. Hyperterminal only seems to work with my newer controllers, but wont communicate with my older ones. (Fanuc 6ta). I was using the utility on shoptalk and downloaded to all the machines just fine. I used the same settings for Hyperterminal and it alarms out. I had to phase out shop talk completly because it had problems with the network. I need to be able to download.
Please Help
Thanks,
David
Thread: Need a Utility
Results 1 to 3 of 3
-
03-07-2006, 12:06 AM #1
Registered
- Join Date
- Mar 2006
- Posts
- 31
Need a Utility
-
03-09-2006, 09:23 PM #2
Registered
- Join Date
- Feb 2004
- Posts
- 41
EZCAM has a utility that works well, as it actually is the predessor to FeatureCam. I am not sure if it is something you can download, but will check for you.
Skillet
-
03-11-2006, 04:56 PM #3
Registered
- Join Date
- Oct 2004
- Posts
- 116
www.cadem.com has a good free utility. It is only good for 1 machine, but at least you can try it. I have used their products before and they are exceptional.
Reply With Quote
Posting Permissions
