504,152 active members
4,612 visitors online
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > Brushless DC servos VS. Brushless R/C motors
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jul 2005
    Posts
    105

    Brushless DC servos VS. Brushless R/C motors

    I was just curious, how are the brushless motors used on model airplanes different from the brushless DC motors used for CNC machines? There are some huge outrunner motors that could probably be geared/belted down for use on our projects. If a suitable encoder is added, we could probably commutate the motor nicely and gain closed-loop feedback as well. Check out the stuff from AXI.

  2. #2
    Gold Member
    Join Date
    Dec 2005
    Posts
    484
    If they are anything like the DC R/C motors, they have like 5 turns of a heavy gauge wire for the windings and draw like 4.2 billion amps. :-) I am not sure they would be very controllable at slow speeds without an extreme amount of heating. Of course I have never tried one as a servo, so I could be wrong.

    It would take some convincing to get me to buy a R/C brushless motor for 2x what I can buy a brushless servo with encoder on ebay.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •