are you using CT-EXPERT to create tech?
Or are you using predefined tech?
is this a "Brass" generator?
try :
B 7.3
A .9
M 21 (for rough cut, and 23 for skim cut), 1 and 3 seem to be incorrect. this should bring the strategy down......
other than that your tech looks okay.
are you absolutely sure that your technology disk matches you com disk?
the wrong version tech in the machine will give poor results.
i would suggest using CT-EXPERT to create tech.
are you giving the part height anywhere in the g-code (REX,E2,H0.75)
Registered Linux User #348337
EMC2 Rocks!!!!