[woodworker2]

Hi, Iam looking for a small tabletop cnc machine, new or used. I ran across this pilot cnc unit for sale in the classified section of this forum. I am using this to cut down on measuring and drill press time. I make some retail display units, and I drill a lot of holes , mostly 5/16", into 1/2" plywood, and I use a 3/8" straight bit and router a few slots. I also use some light 1/8" thick aluminum and drill some holes in it as well. Maximum side to side cutting would be about 16" and total distance travel would be about 15"-16". Looking for any opinions, I don't have that much money to spend, but I would like to have something accurate. Thank you to all of you in advance.

[PDJ]

Hi, For user experiences please take a look at our Testimonial page at -
http://www.pdjinc.com/testimonials.html

Also, we do video demos. Just send us what you would like to see done on the machine and we will video tape the Pilot Pro doing it!

[email protected]

Thanks,
Phil