584,830 active members*
5,686 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2009
    Posts
    30

    Bridgeport TC-22 Encoder Iindex Point

    Hello i have bridgeport TC-22
    i have changed the bearings and the spindle encoder
    the machine worked now but the index point is not exist
    when i change the tool the machine start rotating to infinity
    it cant find the index (reference point)
    the spindle encoder has no index line
    i dont know what happened and where i can find this point .

  2. #2
    Join Date
    Dec 2005
    Posts
    503
    Have you re-orientated the spindle in setup (0,F6,3,3)? When you enter setup does the spindle rotate infinitely? If it stops you should be able to jog the spindle and save a new spindle orientate position. If it doesn't stop you'll need to check the encoder signal.

Similar Threads

  1. Broken BridgePort Encoder, Need new encoder or ServoMotor w/Encoder
    By TNBG_LTD in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 03-18-2020, 08:54 PM
  2. Bridgeport Encoder Wire Routing
    By ronderkis in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 04-24-2013, 01:14 AM
  3. Setting up Bridgeport Explorer Encoder
    By bgator220 in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 04-10-2011, 03:35 AM
  4. Bridgeport R2E3 Boss 8 Encoder problems
    By leftyrowe in forum Bridgeport / Hardinge Mills
    Replies: 8
    Last Post: 11-23-2009, 03:03 PM
  5. Bridgeport 760 t16 encoder problem
    By jke6113 in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 09-29-2008, 01:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •