X axis Bounce & Coasting on Alarm
I'm trying to figure out whats going on with my X axis.
The finishes are getting worse and this is what helical interpolation looks like at 300ipm:
Attachment 339912
Heres a video of the "bouncey" axis:
https://www.youtube.com/watch?v=aE6iD4gNd2M
Here are the machine details:
1998 Haas HS1RP
7500hrs
Backlash on X is .0001"
The other weird quirk I have is that the axis will coast 4-6" when the machine alarms out if it is in motion. However, it will not coast if the E-Stop is pressed.
Any help is appreciated.
-Geoff
-Geoff Warner
VegasCarts.com & myVegasCarts.com