ok here is a pic of my cooler lowered down its def factory you can see where it bolts too,just no fill or tank??, also a pic of right side and pic of pendent with no mpg sorry its a bit dirty im cleaning the chips out
ok here is a pic of my cooler lowered down its def factory you can see where it bolts too,just no fill or tank??, also a pic of right side and pic of pendent with no mpg sorry its a bit dirty im cleaning the chips out
i have all the covers off so it looks bad but it a very clean mech
Looks like the earlier Fadals are quite different before they came with the full enclosures. I believe there are a couple other Fadal owners/users here that are familiar with the early VMC40. If you don't get a response here try looking through other Fadal threads and PM someone who knows about the machine.
Chris
What year is your machine??
Mine is an 85
1986, but i referbished it when i got it a year ago,got my screws re ground and ajsed gibs and replaed thrust bearings for the screws and im going to due a controller upgrade pretty quick i bought two systems ,camsoft and creative evelutions, the creative one i took of a taurs mill that was damaged by a fork lift its a retro fit system it cost 35k 2 yrs ago, and camsoft is a well every one knows about camsoft, not sure witch one to put on?
Sound like we are in the same situation.. What control and i it cheaper just to do a complete retrofit with a new control that will save all kinds of money and have all the memory.. I looking to do tthe complete upgrade for 10K..
well i can only use one so ill be selling the other,just wanted to see if you would be intrested?
cHECK YOU pm FOLDER..