Hi everyone
I need Machine Parameters for 760/22 with TNC 370 control.
Machine parameters are lost.
If anyone can tell me parameters from MP 4310.0 to 4310.6
Thanks in advance
Hi everyone
I need Machine Parameters for 760/22 with TNC 370 control.
Machine parameters are lost.
If anyone can tell me parameters from MP 4310.0 to 4310.6
Thanks in advance
M4310.0 = W980 AND MP4310.6=65535
reagrds
Thanks for reply nuautomation..
Please tell from 4310.0 to 4310.1
4310.0
4310.1
4310.2
4310.3
4310.4
4310.5
4310.6
Sent from my GT-I9100 using Tapatalk 2
And 4310.0 W980
Please tell me the value..
MP 4310.0 is Word 976 & W978
Starting from marker M2292
Sent from my GT-I9100 using Tapatalk 2
So the parameters are set finally...
The machine is up and running..
But now Z axis is not consitant.
Z Axis is giving variation of 150-200 microns.
Ths component picture is attached..
2 components out of 10 gets rejected.
Sent from my GT-I9100 using Tapatalk 2
Sent from my GT-I9100 using Tapatalk 2