My turn to let my battery down too far..I was expecting the controller to let me know when the bat. was low. It used to, before I switched to D cell bats. Oh well.
Can anyone help me with the procedure to manual reference position return the axis on my machine? Of course I'm in the middle of a big production run..:drowning:
Thanks in advance
Claude
Results 1 to 2 of 2
-
06-24-2013, 09:09 PM #1
Registered
- Join Date
- Apr 2008
- Posts
- 211
Alarm 300 APC on Colchester Storm A-50 Fanuc 21i-T
-
06-26-2013, 10:35 PM #2
Registered
- Join Date
- Apr 2008
- Posts
- 211
Got the problem fixed. You can find the fix in the fanuc section.
I love this place.
Here.http://www.cnczone.com/forums/fanuc/...-50_fanuc.html
Reply With QuoteSimilar Threads
-
Clausing Storm Lathe with 21i-T Fanuc control request
By Bill Gillen in forum FanucReplies: 2Last Post: 06-12-2013, 09:08 PM -
Colchester Tornado 100 Fanuc OT
By Clive Dunn in forum Colchester Tornado lathesReplies: 1Last Post: 05-23-2013, 08:05 AM -
Clausing Colchester Storm CNC 100
By CNC BOSS in forum Colchester Tornado lathesReplies: 2Last Post: 06-02-2012, 04:39 AM -
Colchester 2000 Fanuc ot cnc
By SASMAN in forum Colchester Tornado lathesReplies: 0Last Post: 01-24-2011, 01:41 PM -
Colchester Tornado Fanuc 21i-t
By Stebedeff in forum FanucReplies: 2Last Post: 11-08-2010, 02:43 AM
Posting Permissions
